Accura Diamond Tools

Electrician Tools

Armeg Cable Guide Drill Bit

The one tool solution to guiding cables through cavity walls. Ideal for TV Co-Axial, Telephone, Electrical / Power, Alarm System, Data cables.

Drill, attach, pull done! No rods, no wires, no tape, no magnets.

Cable Guide Rods

A quick and easy multi-functional cable-routing tool. Push or pull cables into place through holes as small as 8mm. Range consists of fibreglass rods and solid brass connectors.

Product Description	Part Number
Cable Guide Set ( 10 x 1m Rod Set )	SBC.CR.SET 2

EBS Electrical Box Sinkers & Accessories

The quickest way to produce a square hole for an electrical back box just got even quicker.

Not only can you drill a square hole in under 2 minutes, you can now minimise clean up time with the EBS round Dust Collection Shroud. There is no need for attaching a vacuum, the debris simply collects in the bottom of the shroud. The Dust Collection unit now comes as standard with all EBS sets.

All the accessories and adaptors needed to drive the EBS range of cutters. Cutters do come with the adaptors built in but they can be bought separately to replace damaged items.

Electrical Box Sinker Sets

Product Description	Part Number
EBS Single Set c/w dust collection	EBS.HMSET.DC
EBS Double Set c/w dust collection	EBS.HMDBLSET.DC
EBS Super Set c/w dust collection	EBS.SSET.DC

Electrical Box Sinker Singles

Product Description	Part Number
EBS Round Cutter c/w Adaptor	EBS.ROUND.SET
EBS Square Cutter c/w Adaptor	EBS.SQUARE.SET
EBS Double Square Cutter c/w Adaptor & Template	EBS DOUBLE BOX
EBS Dust Extraction Assembly	EBS.DEXT.ASSY
EBS Dust Extraction Assembly c/w round cutter	EBS.DEXT.SET

Electrical Box Sinker Accessories

Product Description	Part Number
Drive Adaptor for EBS Square Cutter	DL100B4IG
Drive Adaptor for EBS Double Square Cutter	DL100B4IGDB
Drive Adaptor for EBS Round Cutter	DL100B4IP
Drive Adaptor for EBS Round Cutter c/w Dust Collection Unit	EBS.DEXT.ADAPT

Frequently Asked Questions

First things first, how does it work?
Produce a 6mm pilot hole in the wall to locate the position, remove the bulk of the material with the round cutter to the required depth, then square off the hole using either the square cutter or the 80mm wide chisel, depending on the hardness of material.

What type of power tool do I need to use EBS?
You would need an SDS drill capable of rotary/impact and impact only functions (for chiselling). Ideally it would have an approximate weight of at least 2.3kg, a blow energy of approximately 2.4J and a loaded speed of approximately 900rpm.

What setting do I need my drill to be on?
You can use the pilot drill and round cutter on rotary/impact or rotary only. The square cutter can be used on rotary/impact or impact only. The hard material chisel can only be used on impact.

Which materials will EBS sets work in?
The pilot drill and round cutter will work in all masonry materials. The square cutter is designed for use in the softer masonry materials (medium density concrete block,softer brick etc.).In the harder materials (e.g. Engineering brick) you would need to use the 80mm wide hard material chisel for squaring off.

Do I need to turn the rotation off on my drill to use the square cutter?
No,the square cutter has a safety mechanism built into it to stop the whole square from spinning if rotation is left on.You may find it easier, though, to square the hole up on the wall if you use your drill on impact only function.

How do I create a double back box hole?
Either:- Drill two 6mm pilot holes 65mm apart, then use the round cutter twice and square off with the hard material chisel or the square cutter twice Or:- Use the double back box cutter spacing template to space out the pilot holes on the wall, then use the round cutter twice and square off with the rectangular double back box cutter.

Can I buy spares?
Yes, all kit components are available separately. You can even purchase replacement guide rods for the round and square cutters (Please see website or product catalogues for order codes).

I have lost my pilot drill, what size is it?
The pilot drill is a 6 X 160mm SDS drill bit (code:- S06.0x160).

Can the square cutter be re-sharpened?
Yes. You can do this with a good quality file or a grinder. Be careful not to alter the outer dimensions too much otherwise the square hole may be too small.

Electrical Box Sinker Videos

Armeg Wood Beaver

With its all new quad-flute & quad cutting head design, the WoodBeaver really represents the next generation of Wood-Bit Drill Design.

Wood Beaver - Next Generation Wood Drill

Ultra-Smooth and Balanced Cutting Action
Rapid Drilling Action
Extreme Durability
Exceptionally Clean Breakthrough
Maximising Holes per Charge

Product Description	Part Number
10mm Wood Beaver	WWB10.0T
12mm Wood Beaver	WWB12.0T
13mm Wood Beaver	WWB13.0T
16mm Wood Beaver	WWB16.0T
18mm Wood Beaver	WWB18.0T
19mm Wood Beaver	WWB19.0T
20mm Wood Beaver	WWB20.0T
22mm Wood Beaver	WWB22.0T
25mm Wood Beaver	WWB25.0T
32mm Wood Beaver	WWB32.0T
3 Piece Wood Beaver Set	WWB3PCSET
4 Piece Wood Beaver Set	WWB4PCSET

Set Contains: 1 x 16, 20, 25, 32mm Wood Beaver

Stubby Wood Beaver

120mm length design.

Wood Beaver - SDS Plus Adaptor

Product Description	Part Number
1/4" Wood Beaver SDS Adaptor	SDS1/4WB055
7/16" Wood Beaver SDS Adaptor	SDS7/16WB090

1/4" Adaptor for use in 10 to 25mm Wood Beaver 7/16" Adaptor for use in 32mm Wood Beaver

Accura Diamond Tools