At first sight a drill rig like any other. However, the new diamond core drill rig KS 18 has certain features which distinguish it from standard rigs.
Here are some of the special features:
Guides and bearings - Slip guides, sideways and bearings are made of a new compound material, i.e.extremely abrasion resistant, low in maintenance and extremely smooth gearing. Thus, the slip guides can be pre-stressed easily. The feed carriage now slides absolutely free from backlash, yet running free on the drilling column.
For the drill bit this means:
Less pipe friction, less vibration especially at the opening, but much higher endurance.
Operating - The KS 18 drill feed is operated by an ergonomically designed hand wheel which simply be placed on to the feed pinion either on the left- or right-hand side. The rig pedestal can be fixed with dowel screws or vacuum. Only Vacuum fittings and a gasket are required for the vacuum fixture. The drill column can, of course, be adjusted to an angle of more than 80 degrees.
Corrosion Protection - All essential parts are rustproof. Drill column, struts, leveling screws, feed carriage levers and feed pinion are made of stainless steel. Feed carriage casing and pedestal are made of corrosion resistant aluminium alloy.
The KS 18 is recommended for WEKA diamond core drilling machines Type DK 12, DK 13 and DK 14, as well as for the DK 16, DK 17 and DK 18. The drilling machine is fixed into the rig at the collar. The collar diameter is 60 mm.
| overall length | mm | 770 |
| Feed path | mm | 514 |
| Drill bit length max. | mm | 530 |
| Drill bit diameter max. | mm | 180 |
| Tilt adjustment | Degree | 80 |
| Collet diameter | mm | 60 |
| Weight | kg | 9.5 |
For more information about this product, Contact the AccurA Team of experts on 01 6105055 or email info@AccurA.ie
Cuts concrete, asphalt, stone, and brick
Longer lifespan with industrial diamond segments
High-speed cutting for maximum efficiency
You may also like
At first sight a drill rig like any other. However, the new diamond core drill rig KS 18 has certain features which distinguish it from standard rigs.
Here are some of the special features:
Guides and bearings - Slip guides, sideways and bearings are made of a new compound material, i.e.extremely abrasion resistant, low in maintenance and extremely smooth gearing. Thus, the slip guides can be pre-stressed easily. The feed carriage now slides absolutely free from backlash, yet running free on the drilling column.
For the drill bit this means:
Less pipe friction, less vibration especially at the opening, but much higher endurance.
Operating - The KS 18 drill feed is operated by an ergonomically designed hand wheel which simply be placed on to the feed pinion either on the left- or right-hand side. The rig pedestal can be fixed with dowel screws or vacuum. Only Vacuum fittings and a gasket are required for the vacuum fixture. The drill column can, of course, be adjusted to an angle of more than 80 degrees.
Corrosion Protection - All essential parts are rustproof. Drill column, struts, leveling screws, feed carriage levers and feed pinion are made of stainless steel. Feed carriage casing and pedestal are made of corrosion resistant aluminium alloy.
The KS 18 is recommended for WEKA diamond core drilling machines Type DK 12, DK 13 and DK 14, as well as for the DK 16, DK 17 and DK 18. The drilling machine is fixed into the rig at the collar. The collar diameter is 60 mm.
| overall length | mm | 770 |
| Feed path | mm | 514 |
| Drill bit length max. | mm | 530 |
| Drill bit diameter max. | mm | 180 |
| Tilt adjustment | Degree | 80 |
| Collet diameter | mm | 60 |
| Weight | kg | 9.5 |
For more information about this product, Contact the AccurA Team of experts on 01 6105055 or email info@AccurA.ie
Cuts concrete, asphalt, stone, and brick
Longer lifespan with industrial diamond segments
High-speed cutting for maximum efficiency
You may also like
Top 10 FAQ Suggestions for Accura Diamond Tools
Limited Stock Remaining – Order Now!
